Troubleshooting Common Jet Vacuum Power Problems

If you have a Jet vacuum, you know that it’s a powerful little machine. But what do you do if it starts to lose suction power? Here are some troubleshooting tips to help you get your Jet vacuum back up and running at full strength.

1. Check the power cord for any frayed wires or damage

Safety first! Before powering up any device, it is important to always check the power cord for frayed wires or other damage. Not only could this mean costly repairs, but also serious danger if not addressed. So take a quick second and make sure to always inspect the power cord before you plug in and let your device do its thing. It’s an easy and crucial step for keeping your devices happy and you safe.

Inspect the vacuum’s on/off switch to see if it’s defective

Before you get out the screwdriver to start taking apart your vacuum, check if its on/off switch is working like it should. All it takes is a push of a button, if the switch lights up and turns off when toggled, you can give yourself a pat on the back for passing that inspection! You may find checking this small switch saves you a lot of time and trouble in getting your cleaner up and running again.

Clean the vacuum’s filters to ensure they’re not clogged

Every now and then, you should take a few minutes to check in on the health of your vacuum cleaner. Cleaning your pump ejectors and filters is a fairly quick task that will dramatically improve your vacuuming experience. The pump ejector is found near the rear of the vacuum, between the roller brush and fan. If you find it hard to reach parts of your carpet when vacuuming, or if you notice less suction power than before, it’s time to clean those filters out! A few swipes with a damp cloth might do the trick and remove any dirt or dust that may have clogged up your pump ejectors. 

Empty the vacuum’s canister or bag if it’s full

Vacuuming regularly is essential for keeping a clean and comfortable home. Don’t forget to check the canister or bag of your vacuum every few weeks, you would be surprised how quickly it can fill up! Emptying the full canister or bag will help ensure that you have maximum suction power when you vacuum, making the job less time-consuming and more efficient. It’ll also help keep your home tidy, so why not make it part of your regular cleaning routine? A few minutes of maintenance now could save you from bigger messes down the road.

Check for any blockages in the vacuum’s hose or attachments

Checking for any blockages in your vacuum’s hose is a great way to keep it running at peak efficiency. Pump ejectors can get clogged over time, so don’t forget to check the hose and attachments regularly. Doing this can help ensure that your vacuum is able to clean up every nook and cranny as quickly as possible. Ultimately, you’ll be able to get the job done faster and make cleaning a breeze!

Restart the vacuum and see if the issue has been resolved

If you’re finding your vacuum isn’t performing as expected, it’s time to restart and give it another shot. It’s possible that a small issue may have come up causing it to work improperly however if the issue persists then you’ll want to get it looked at professionally. With a simple reset, you could avoid any further hassle.

By following these simple steps, you can troubleshoot most vacuum problems and get it up and running again in no time. So the next time your vacuum starts acting up, don’t panic, just follow this handy guide and give it a little TLC. Your vacuum will be good as new in no time!